【重要提醒】单极安全滑触线主要特点是什么|探索供电系统的小秘密~~~
1、接触性能好，无拉弧现象，不会发生电源中断故障，运行可靠。
1. Good contact performance, no arc phenomenon, no power interruption, reliable operation.
2、可适用于高温、高湿、高电压、强腐蚀、多粉尘等恶劣环境中。
2. It can be used in high temperature, high humidity, high voltage, strong corrosion, multi-dust and other harsh environments.
3、机械强度高、刚度好、不易弯曲变型，能承受较大的短路冲击电流，不致发生故障。
3. It has high mechanical strength, good stiffness, not easy to bend, and can withstand large short-circuit impulse current without breakdown.
4、采用电阻率较小的铜导体或铜铝型材，可大幅度降低导线本身电能的损耗。
4. The use of copper conductors or copper-aluminium profiles with low resistivity can greatly reduce the loss of electric energy of the conductors themselves.
5、铜导体载流量大，zui大可达3000A以上。
5. The copper conductor has a large carrying capacity, and the Zui can reach more than 3000A.
6、附加辅助电缆后，导线的阻抗能成倍降低，可组成低阻抗滑导线，应用更为广泛。
6. After adding auxiliary cables, the impedance energy of the conductor is reduced exponentially, and the low impedance sliding conductor can be formed, which is more widely used.
7、布线可多样化，可在上部，下部或侧面滑触。
7. Wiring can be diversified, and can be slid on top, bottom or side.
8、QYT系列高温刚体滑触线散热面积大，温升低，使用寿命长。
8. QYT series high temperature rigid sliding contact wire has large heat dissipation area, low temperature rise and long service life.
9、结构简单，安装方便，可分为上压式、侧压式、下压式三种。
9. It is simple in structure and easy to install. It can be divided into three types: upper pressure type, side pressure type and lower pressure type.
10、维修更换方便、迅速，省时，省力。
10. Maintenance and replacement are convenient, rapid, time-saving and labor-saving.
更多滑触线资料 尽在济南德玛电气有限公司