现在很多自动化设备选择安全滑触线作为供电线，但是在运行过程中需要有弯弧出现，所以，制作弧形滑触线需要注意哪些事情，今天小编就为大家讲解一下：

Nowadays, many automation equipments choose safety sliding contact wire as power supply line, but in the process of operation, curved arc is needed. So, what should we pay attention to when making arc sliding contact wire?

1.一般来说自动化设备功率不大，所以采用载流量比较小的滑触线，比如管式安全滑触线或者是400A以下单极安全滑触线。根据现场环境和载流量的不同可以选择不同的型号。

1. Generally speaking, the power of automation equipment is not very high, so the slippery contact wire with relatively small carrying capacity, such as the tubular safety contact wire or the unipolar safety contact wire below 400A, is adopted. Different models can be selected according to the different field environment and carrying capacity.

2.聚氯乙烯外壳安全滑触线可以制作成弧形滑触线，但是金属外壳滑触线一般不建议制作成弯弧滑触线。

2. Polyvinyl chloride shell safety sliding contact wire can be made into arc sliding contact wire, but metal shell sliding contact wire is generally not recommended to be made into arc sliding contact wire.

3.为了实现集电器更顺畅的运行，滑触线半径需要大于1.5米。

3. In order to run the collector more smoothly, the sliding contact radius needs to be greater than 1.5 meters.

4.在两段滑触线连接时，将导体延长至另一段滑触线外壳中之后再进行连接，这样集电器在运动时不会出现运行不畅，接触不良等情况。

4. When two sliding contact wires are connected, the conductor is extended to another sliding contact wire shell and then connected, so that the collector will not run smoothly and contact badly when moving.

更多滑触线资料 尽在济南德玛电气有限公司